XTools Pro Chain Rivet Extractor

. The X Tools Pro Chain Rivet Extractor is a must for every home mechanic. Constructed from heavy duty steel with strong rubberised grips, this chain tool is ideal for removing chain pins with complete confidence Features Durable steel construction Oversized plastic handles for grip and comfort Comes with one replacement splitting pin Adjustable chain support screw prevents damage to the chain and the tool Suitable for all chains from single speed to derailleur type 5 11 speed Adjustable locking barrel can be used to prevent pushing the chain right through and out the other side Instructions for proper use . Back off the handle to make room for the chain to be fitted to the tool Back off the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool nearest the adjustable support Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Turn the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re position the chain in the tool Repeat steps 5 and 6 until the two pins are aligned Now firmly tighten the handle to push the pin out, splitting the chain You can use the locking barrel to prevent pushing the chain pin right out of the other side. This makes it much easier to join a chain and push the pin back in again. Note that you can only do this on certain types of chain Check with the manufacturer for details The only time you would use the front teeth on the tool is to loosen a tight link slightly If you try to split a chain using them, you will break them off Buy X Tools Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Price: £15.99 from Chain Reaction Cycles